Custom designed or readymade, doors, and windows have contours that can mark a project. And they have an ally of weight: With the advancement of technology in the industry of paints, varnishes, waxes and impregnants, the possibilities to increase or decrease the emphasis you want to give every detail. Let’s talk a little about some of the most used options in the construction market.

What are the benefits of aluminum?

Lightness, easy handling, and simple maintenance, plus good salt spray resistance. Ionization, made in manufacturing, increases the protection and durability of aluminum for the coastal regions. The treatment forms an aluminum oxide layer that protects against corrosion, salinity and industrial smoke. Electrostatic powder painting is also possible, a fine finish applied in manufacturing that adheres to all cavities and recesses on the surface. In case of the windows and doors replacement in Oshawa this is important now.

When should I opt for wood?

In places that require greater thermal insulation. But it can suffer a lot of deformation during poor installation. The choice of good professionals to install your doors and windows is essential for the product to be more durable. To avoid warping due to sunlight and moisture, treat the material with impregnating oils, which form a protective film and maintain its beauty. Prefer massive models, more resistant to termite attack and the action of time.

What are the advantages of PVC?

Durable and easy to maintain, it provides great sound insulation and good sealing because the joints are welded, seamless. In any case, products should be warranted against deterioration and fading caused by sun exposure. Best to install in weather protected areas.

Older buildings suffer from deterioration caused by weather and other natural phenomena such as sun, humidity, among others. The renovation of an old house is necessary from time to time to avoid further damage especially in the structure of the property. Doors by time are common to suffer a little more since they are everyday objects and an old door may also not contribute much to the aesthetic appearance of the property.

Sometimes replacing a door simply means replacing a door, called a blank or a door, for another. But in some cases, you will have to tear off and replace the old door jamb, which includes the door jambs and the threshold especially. if these limbs of wood began to rot.

Even if the old door frame looks good, the nails on the wall she nailed can bend and settle outside the house. This makes it difficult to open and close the door. This is just an option with a wooden door; Metal and fiberglass doors cannot be planed or cut.

Most new doors are secured, meaning the door is hinged inside a new frame (these systems also include some form of caulking). Pre-cut doors are the ideal choice if the old frame is bad or if you are removing the frame because you want to enlarge the aperture.

How is the maintenance of each material?

Clean with neutral products as recommended by the manufacturer on the packaging or in the user manual. Avoid abrasive agents such as double-sided sponges and steel wool, and chemicals such as removers, kerosene, chlorine and multipurpose cleaners that damage any material. For wood, observe the paint or varnish manufacturers’ recommendations regarding the frequency of application. Prior to overcoating, peel off the previous layer to prevent product buildup, which may compromise leaf movement in the frame. For varnishes, sand the old layer until all the gloss disappears.